Producing polyglycerol polyester polyol for thermoplastic polyurethane application: A novel valorization of glycerol, a by-product of biodiesel production

The production of biodiesel generates glycerol as a by-product that needs valorization. Glycerol, when converted to polyglycerol, is a potential polyol for bio-based thermoplastic polyurethane (TPU) production. In this study, a novel polyglycerol polyester polyol (PPP) was developed from refined glycerol and coconut oil-based polyester polyol. Glycerol was first converted to glycerol acetate and then polymerized with coconut oil-based polyester polyol (CPP) as secondary polyol and phthalic anhydride. The resulting PPP polymerized at 220 °C and OH:COOH molar ratio of 2.5 exhibited an OH number of <100 mg KOH·g sample−1, an acid number of <10 mg KOH·g sample−1, and a molecular weight (MW) of 3697 g mol−1 meeting the polyol requirement properties for TPU (Handlin et al., 2001; Parcheta et al., 2020) [1-2]. Fourier-transform infrared (FTIR) spectroscopic characterization determined that higher reaction temperatures increase the polymerization rate and decrease the OH and acid numbers. Further, higher OH:COOH molar ratios decrease the polymerization rate and acid number, and increase the OH number. Gel permeation chromatography determined the molecular weight of PPP and suggested two distinct molecular structures which differ only in the number of moles of CPP in the structure. A differential scanning calorimetric (DSC) experiment on a sample of PPP-based polyurethane revealed that it was able to melt and remelt after 3 heating cycles which demonstrates its thermoplastic ability. The novel PPP derived from the glycerol by-product of biodiesel industries can potentially replace petroleum-derived polyols for TPU production.