TY - GEN
T1 - Structural, mechanical and corrosion properties of Mg/SiO2 and MgO/SiO2 multilayer coatings for magnesium implant devices
AU - Kotoka, R.
AU - Fialkova, S.
AU - Neralla, S.
AU - Yarmolenko, S.
AU - Pai, D.
AU - Sankar, J.
N1 - Publisher Copyright:
Copyright © 2015 by ASME.
PY - 2015
Y1 - 2015
N2 - In this study, Mg/SiO2 and MgO/SiO2 multilayer coatings with bilayer thicknesses (λ) 10, 20, 40, 100, 200 and 1000 nm were deposited on glass substrates using DC and reactive pulsed DC magnetron sputtering processes. The aim of these coatings is to control the initial degradation and provide mechanical strength to magnesium implant during handling and installation. The initial thickness calibrations and deposition rates optimization were conducted using stylus profilometer. After deposition of the multilayer coatings, the values of their bilayer thicknesses (λ) were obtained from X-ray reflectometery. The mechanical properties, surface morphology and roughness of multilayer coatings were studied using nanoindentation, SEM and AFM respectively. The nanoindentation results showed higher hardness of MgO/SiO2 multilayer coatings compared to single layer Mg. The roughness analyses showed improved roughness for bilayer thicknesses (λ) less than 20 nm. It was observed from the SEM images that SiO2 coatings has pores. By adding Mg and/or MgO in the form of multilayers improves the pores significantly. The Mg/SiO2 multilayer coatings showed controlled degradation rate when immersed in saline solution compared to the monolithic SiO2 coating. In conclusion, conditions for depositing Mg/SiO2 and MgO/SiO2 multilayer coatings has been optimized. Alternating brittle SiO2 ceramic layers with soft and ductile Mg layers significantly improved the hardness of the Mg coating. Hardness of multilayer coatings can be fine-tuned by modifying bilayer thicknesses. Significant improvement in the corrosion and mechanical properties of the multilayer coatings can be used to protect surface of magnesium implant material during handling, storage and installation.
AB - In this study, Mg/SiO2 and MgO/SiO2 multilayer coatings with bilayer thicknesses (λ) 10, 20, 40, 100, 200 and 1000 nm were deposited on glass substrates using DC and reactive pulsed DC magnetron sputtering processes. The aim of these coatings is to control the initial degradation and provide mechanical strength to magnesium implant during handling and installation. The initial thickness calibrations and deposition rates optimization were conducted using stylus profilometer. After deposition of the multilayer coatings, the values of their bilayer thicknesses (λ) were obtained from X-ray reflectometery. The mechanical properties, surface morphology and roughness of multilayer coatings were studied using nanoindentation, SEM and AFM respectively. The nanoindentation results showed higher hardness of MgO/SiO2 multilayer coatings compared to single layer Mg. The roughness analyses showed improved roughness for bilayer thicknesses (λ) less than 20 nm. It was observed from the SEM images that SiO2 coatings has pores. By adding Mg and/or MgO in the form of multilayers improves the pores significantly. The Mg/SiO2 multilayer coatings showed controlled degradation rate when immersed in saline solution compared to the monolithic SiO2 coating. In conclusion, conditions for depositing Mg/SiO2 and MgO/SiO2 multilayer coatings has been optimized. Alternating brittle SiO2 ceramic layers with soft and ductile Mg layers significantly improved the hardness of the Mg coating. Hardness of multilayer coatings can be fine-tuned by modifying bilayer thicknesses. Significant improvement in the corrosion and mechanical properties of the multilayer coatings can be used to protect surface of magnesium implant material during handling, storage and installation.
KW - Hardness
KW - Magnesium
KW - Magnesium oxide
KW - Magnetron sputtering
KW - Multilayer coatings
KW - Silicon oxide
UR - https://www.scopus.com/pages/publications/84982985784
U2 - 10.1115/IMECE2015-51767
DO - 10.1115/IMECE2015-51767
M3 - Conference contribution
T3 - ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
BT - Emerging Technologies; Safety Engineering and Risk Analysis; Materials
PB - American Society of Mechanical Engineers (ASME)
T2 - ASME 2015 International Mechanical Engineering Congress and Exposition, IMECE 2015
Y2 - 13 November 2015 through 19 November 2015
ER -